EP025B272M-J [TAIYO YUDEN]
Please read this notice before using the TAIYO YUDEN products.; 使用本公司产品前,请仔细阅读本公告。型号: | EP025B272M-J |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Please read this notice before using the TAIYO YUDEN products. |
文件: | 总26页 (文件大小:466K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components listed in this catalogue are intended for use in general electronic equipment such as AV/
OA equipment, home electrical appliances, office equipment, and information-communication equipment (mobile
phone, PC, etc.), Medical equipment, Industrial equipment, and in automotive applications (for comfort). Please be
sure to contact TAIYO YUDEN CO., LTD. for further information before using the components for any equipment
which might have a negative impact directly on human life, such as transportation equipment (automotive pow-
ertrain/train/ship control systems, etc.) and traffic signal system.
Please do not incorporate the components into any equipment requiring a high degree of safety and reliability, such
as aerospace equipment, avionics, nuclear control equipment, submarine system, and military equipment.
For use in high safety and reliability-required devices/circuits of general electronic equipment, thorough safety
evaluation prior to use is strongly recommended, and a protective circuit should be designed and installed as nec-
essary.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
AXIAL LEADED CERAMIC CAPACITORS
WAVE
■PARTS NUMBER
△=Blank space
U
P
0
2
5
△ B
④
1
0
4
K - A -
B
△ Z
⑨
①
②
③
⑤
⑥
⑦
⑧
①Rated voltage
⑥Capacitance tolerances
Code
Rated voltage[VDC]
Code
D-
J-
Capacitance tolerances
±0.5pF
L
E
T
G
U
10
16
25
35
50
±5%
K-
M-
Z-
±10%
±20%
+80/-20%
②Series name
⑦Lead Configurations
Code
P
Series name
Code
A-
B-
KF
Lead Configurations
26mm lead space, ammo pack
52mm lead space, ammo pack
5.0mm pitch formed lead bulk
7.5mm pitch formed lead bulk
Axial lead, bulk
Axial leaded capacitor
③Dimensions(L×φD)
Code
025
Dimensions(L×φD)[mm]
2.3×2.0 (Multilayer type)
3.2×2.2 (Multilayer type)
4.2×3.2 (Multilayer type)
KE
NA
050
075
⑧Packaging
Code
B
Packaging
Ammo
Bulk
④Temperature characteristics
Code
CH
Temperature Characteristics
C
0±60(ppm/℃)
+350~-1000(ppm/℃)
±10%
SL
⑨Internal code
△B
B5
Code
△△
△Z
Internal Code
±15%
Multilayer type (Standard)
Multilayer type (Low voltage type)
△F
+30/-85%
△J
⑤Nominal capacitance
Code
Nominal capacitance[pF]
(example)
010
1
1R2
103
1.2
10000
※R=Decimal point
■STANDARD EXTERNAL DIMENSIONS / MINIMUM QUANTITY
Minimum quantity [pcs]
Bulk
Type
L
φD
φd
0.45±0.05
Taping
NA
KF
KE
A-/B-
2.3max
(0.09max)
3.2max
2.0max
(0.079max)
2.2max
Multilayer type 025
Multilayer type 050
Multilayer type 075
1000
1000
1000
4000
-
5000
(0.018±0.002)
0.45±0.05
3000
-
-
3000
2000
(0.126max)
4.2max
(0.087max)
3.2max
(0.018±0.002)
0.55±0.05
3000
(0.165max)
(0.126max)
(0.022±0.002)
Unit:mm(inch)
Bulk
KF
Taping
Straight
Straight
NA
Formed
A-
KE
B-
52(2.047)
Pitch:5.0(0.197)
Pitch:7.5(0.295)
26(1.024)
Unit:mm(inch)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
30
■PARTS NUMBER
●Multilayer 025 typeꢀClass 1
Parts number
Insulation resistance
[MΩ](min.)
Rated voltage[V]
EHS
Nominal capacitance[pF]
Capacitance tolerance
Q
UP025△010D-[] Z
UP025△1R2D-[] Z
UP025△1R5D-[] Z
UP025△1R8D-[] Z
UP025△2R2D-[] Z
UP025△2R7D-[] Z
UP025△3R3D-[] Z
UP025△3R9D-[] Z
UP025△4R7D-[] Z
UP025△5R6K-[] Z
UP025△6R8K-[] Z
UP025△8R2K-[] Z
UP025△100J-[] Z
UP025△120J-[] Z
UP025△150J-[] Z
UP025△180J-[] Z
UP025△220J-[] Z
UP025△270J-[] Z
UP025△330J-[] Z
UP025△390J-[] Z
UP025△470J-[] Z
UP025△560J-[] Z
UP025△680J-[] Z
UP025△820J-[] Z
UP025CH101J-[] Z
UP025CH151J-[] Z
UP025CH221J-[] Z
UP025CH331J-[] Z
UP025CH471J-[] Z
UP025CH681J-[] Z
UP025CH102J-[] Z
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±10%
±10%
±10%
±5%
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧1000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
12
±5%
15
±5%
18
±5%
22
±5%
27
±5%
33
±5%
39
±5%
Q≧1000
47
±5%
Q≧1000
56
±5%
Q≧1000
68
±5%
Q≧1000
82
±5%
Q≧1000
100
150
220
330
470
680
1 000
±5%
Q≧1000
±5%
Q≧1000
±5%
Q≧1000
±5%
Q≧1000
±5%
Q≧1000
±5%
Q≧1000
±5%
Q≧1000
・△Please specify the temperature characteristics
・[] Please specify the lead configuration code.
・●[] Temperature characteristics has CH and SL.
●Multilayer 025 typeꢀClass 2
Insulation resistance
[MΩ](min.)
Parts number
Rated voltage[V]
EHS
Nominal capacitance[pF]
Capacitance tolerance
tanδ
UP025 B101K-[] Z
UP025 B121K-[] Z
UP025 B151K-[] Z
UP025 B181K-[] Z
UP025 B221K-[] Z
UP025 B271K-[] Z
UP025 B331K-[] Z
UP025 B391K-[] Z
UP025 B471K-[] Z
UP025 B561K-[] Z
UP025 B681K-[] Z
UP025 B821K-[] Z
UP025 B102K-[] Z
UP025 B122K-[] Z
UP025 B152K-[] Z
UP025 B222K-[] Z
UP025 B332K-[] Z
UP025 B472K-[] Z
UP025 B682K-[] Z
UP025 B103K-[] Z
UP025 B153K-[] Z
UP025 B223K-[] Z
UP025 B333K-[] Z
UP025 B473K-[] Z
UP025 B683K-[] Z
UP025 B104K-[] Z
EP025 B224K-[] Z
EP025 B474K-[] Z
EP025 B105K-[] Z
UP025B5105K-[] Z
UP025 F103Z-[] Z
UP025 F223Z-[] Z
UP025 F473Z-[] Z
UP025 F104Z-[] Z
EP025 F224Z-[] Z
EP025 F474Z-[] Z
EP025 F105Z-[] Z
EP025 B122M-[] J
EP025 B152M-[] J
EP025 B182M-[] J
EP025 B222M-[] J
EP025 B272M-[] J
EP025 B332M-[] J
EP025 B392M-[] J
EP025 B472M-[] J
EP025 B562M-[] J
EP025 B682M-[] J
EP025 B822M-[] J
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
16
16
16
50
50
50
50
50
16
16
16
16
16
16
16
16
16
16
16
16
16
16
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
100
120
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦7.5%
tanδ≦12.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦10.0%
tanδ≦10.0%
tanδ≦17.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
1,000
1,000
1,000
500
150
180
220
270
330
390
470
560
680
820
1 000
1 200
1 500
2 200
3 300
4 700
6 800
10 000
15 000
22 000
33 000
47 000
68 000
100 000
220 000
470 000
1 000 000
1 000 000
10 000
22 000
47 000
100 000
220 000
470 000
1 000 000
1 200
1 500
1 800
2 200
2 700
3 300
3 900
4 700
5 600
6 800
8 200
200
100
100
1,000
1,000
1,000
1,000
500
500
250
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
・[] Please specify the lead configuration code.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
31
■PARTS NUMBER
Parts number
Insulation resistance
[MΩ](min.)
Rated voltage[V]
EHS
Nominal capacitance[pF]
Capacitance tolerance
tanδ
EP025 B103M-[] J
EP025 B123M-[] J
EP025 B153M-[] J
EP025 B183M-[] J
EP025 B223M-[] J
TP025 F103Z-[] J
TP025 F223Z-[] J
TP025 F473Z-[] J
16
16
16
16
16
25
25
25
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10 000
12 000
15 000
18 000
22 000
10 000
22 000
47 000
±20%
±20%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦7.5%
5,000
5,000
5,000
5,000
5,000
1,000
1,000
1,000
±20%
±20%
±20%
+80/-20%
+80/-20%
+80/-20%
・[] Please specify the lead configuration code.
●Multilayer 050 typeꢀClass 1
Insulation resistance
[MΩ](min.)
Parts number
Rated voltage[V]
EHS
Nominal capacitance[pF]
Capacitance tolerance
Q
UP050CH220J-[] Z
UP050CH240J-[] Z
UP050CH270J-[] Z
UP050CH300J-[] Z
UP050CH330J-[] Z
UP050CH360J-[] Z
UP050CH390J-[] Z
UP050CH430J-[] Z
UP050CH470J-[] Z
UP050CH510J-[] Z
UP050CH560J-[] Z
UP050CH620J-[] Z
UP050CH680J-[] Z
UP050CH750J-[] Z
UP050CH820J-[] Z
UP050CH910J-[] Z
UP050CH101J-[] Z
UP050CH111J-[] Z
UP050CH121J-[] Z
UP050CH131J-[] Z
UP050CH151J-[] Z
UP050CH161J-[] Z
UP050CH181J-[] Z
UP050CH201J-[] Z
UP050CH221J-[] Z
UP050CH241J-[] Z
UP050CH271J-[] Z
UP050CH301J-[] Z
UP050CH331J-[] Z
UP050CH361J-[] Z
UP050CH391J-[] Z
UP050CH431J-[] Z
UP050CH471J-[] Z
UP050CH511J-[] Z
UP050CH561J-[] Z
UP050CH621J-[] Z
UP050CH681J-[] Z
UP050CH751J-[] Z
UP050CH821J-[] Z
UP050CH911J-[] Z
UP050CH102J-[] Z
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
22
24
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Q≧400+20C
Q≧400+20C
Q≧400+20C
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
Q≧1000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
★
★
★
★
★
★
27
30
33
36
39
43
47
51
56
62
68
★
★
★
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1 000
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
・[] Please specify the lead configuration code.
★ : Option
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
32
■PARTS NUMBER
●Multilayer 050 typeꢀClass 2
Parts number
Insulation resistance
[MΩ](min.)
Rated voltage[V]
EHS
Nominal capacitance[pF]
Capacitance tolerance
tanδ
UP050 B122K-[] Z
UP050 B152K-[] Z
UP050 B182K-[] Z
UP050 B222K-[] Z
UP050 B272K-[] Z
UP050 B332K-[] Z
UP050 B392K-[] Z
UP050 B472K-[] Z
UP050 B562K-[] Z
UP050 B682K-[] Z
UP050 B822K-[] Z
UP050 B103K-[] Z
UP050 B123K-[] Z
UP050 B153K-[] Z
UP050 B183K-[] Z
UP050 B223K-[] Z
UP050 B273K-[] Z
UP050 B333K-[] Z
UP050 B393K-[] Z
UP050 B473K-[] Z
UP050 B563K-[] Z
UP050 B683K-[] Z
UP050 B823K-[] Z
UP050 B104K-[] Z
UP050 B224K-[] Z
UP050 B474K-[] Z
GP050 B105K-[] Z
EP050 B225K-[] Z
EP050 B475K-[] Z
EP050 B106K-[] Z
UP050 F103Z-[] Z
UP050 F223Z-[] Z
UP050 F473Z-[] Z
UP050 F104Z-[] Z
UP050 F224Z-[] Z
UP050 F474Z-[] Z
UP050 F105Z-[] Z
EP050 F225Z-[] Z
LP050 F475Z-[] Z
LP050 F106Z-[] Z
★
★
★
★
★
★
★
★
★
★
★
★
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
35
16
16
16
50
50
50
50
50
50
50
16
10
10
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1 200
1 500
±10%
±10%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦3.5%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦5.0%
tanδ≦7.5%
tanδ≦12.5%
tanδ≦12.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦10.0%
tanδ≦10.0%
tanδ≦15.0%
tanδ≦15.0%
tanδ≦17.5%
tanδ≦17.5%
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
1,000
1,000
1,000
1,000
1,000
500
1 800
±10%
2 200
±10%
2 700
±10%
3 300
±10%
3 900
±10%
4 700
±10%
5 600
±10%
6 800
±10%
8 200
±10%
10 000
±10%
12 000
±10%
15 000
±10%
18 000
±10%
2 2000
±10%
27 000
±10%
33 000
±10%
39 000
±10%
47 000
±10%
56 000
±10%
68 000
±10%
82 000
±10%
100 000
220 000
470 000
1 000 000
2 200 000
4 700 000
10 000 000
10 000
±10%
±10%
±10%
200
±10%
100
±10%
50
±10%
20
±10%
20
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
+80/-20%
1,000
1,000
1,000
1,000
500
22 000
47 000
100 000
220 000
470 000
1 000 000
2 200 000
4 700 000
10 000 000
500
250
125
50
25
・[] Please specify the lead configuration code.
★ : Option
●Multilayer 075 typeꢀClass 2
Insulation resistance
[MΩ](min.)
Parts number
Rated voltage[V]
EHS
Nominal capacitance[pF]
Capacitance tolerance
tanδ
UP075 B105K-[]
GP075 B225K-[]
GP075 B475K-[]
TP075 B106K-[]
UP075B5225K-[]
UP075B5475K-[]
GP075B5106K-[]
GP075 F106Z-[]
50
35
35
25
50
50
35
35
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1 000 000
2 200 000
4 700 000
10 000 000
2 200 000
4 700 000
10 000 000
10 000 000
±10%
±10%
±10%
±10%
±10%
±10%
±10%
+80/-20%
tanδ≦5.0%
tanδ≦7.5%
tanδ≦7.5%
tanδ≦12.5%
tanδ≦12.5%
tanδ≦12.5%
tanδ≦12.5%
tanδ≦17.5%
100
50
20
20
40
10
10
25
・[] Please specify the lead configuration code.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
33
Axial Leaded Ceramic Capacitors
■PACKAGING
①Minimum Quantity
Minimum Quantity [pcs]
Type
Lead configuration code
A-(1.024 inch wide)
Bulk
Taping
2000(075)
3000(050)
5000(025)
-
B-(2.047 inches wide)
Multilayer type
(075, 050, 025)
NA
1000
3000
3000
4000
KE(075)
KF(050)
KF(025)
-
②Dimensions of Bulk Products
●NA configuration
Dimensions(mm)
Type
φD
L
φd
ℓ
20.0min.
Multilayer type
025
2.0max.
(0.079max.)
2.2max.
2.3max.
0.45±0.05
(0.018±0.002)
0.45±0.05
(0.09max.)
3.2max.
(0.787min.)
20.0min.
Multilayer type
050
(0.087max.)
3.2max.
(0.126max.)
4.2max.
(0.018±0.002)
0.55±0.05
(0.787min.)
20.0min.
Multilayer type
075
(0.126max.)
(0.165max.)
(0.022±0.002)
(0.787min.)
Unit:mm(inch)
●KF/KE configuration
Dimensions(mm)
Lead configuration
code
Type
φD
L
W
φd
ℓ
Multilayer type
025
2.0max.
2.3max.
5.0±0.5
(0.197±0.020)
5.0±0.5
0.45±0.05
6.5±0.5
KF
KF
KE
(0.079max.)
2.2max.
(0.09max.)
3.2max.
(0.018±0.002)
0.45±0.05
(0.256±0.020)
6.5±0.5
Multilayer type
050
(0.087max.)
3.2max.
(0.126max.)
4.2max.
(0.197±0.020)
7.5±0.5
(0.018±0.002)
0.55±0.05
(0.256±0.020)
6.5±0.5
Multilayer type
075
(0.126max.)
(0.165max.)
(0.295±0.020)
(0.022±0.002)
(0.256±0.020)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_pack_e-E02R01
③Taping Dimensions
●A-(a:1.024 inch wide)configuration
Dimensions(mm)
Minimum insertion
pitch
Type
φD
L
a
b
|L1-L2|
φd
Multilayer type
025
2.0max.
(0.079max.)
2.2max.
2.3max.
0.45±0.05
(0.09max)
3.2max.
(0.018±0.002)
0.45±0.05
5.0
(0.197)
Multilayer type
050
26+0.5/-0
0.8max.
0.5max.
(0.087max.)
3.2max.
(0.126max.)
4.2max.
(1.024+0.020/-0)
(0.031max.)
(0.020max.)
(0.018±0.002)
0.55±0.05
Multilayer type
075
7.5
(0.126max.)
(0.165max.)
(0.022±0.002)
(0.295)
Unit:mm(inch)
●B-(a:2.047 inches wide)configuration
Dimensions(mm)
Minimum insertion
pitch
Type
φD
L
a
b
|L1-L2|
φd
Multilayer type
025
2.0max.
(0.079max.)
2.2max.
2.3max.
0.45±0.05
(0.09max.)
3.2max.
(0.018±0.002)
0.45±0.05
5.0
(0.197)
Multilayer type
050
52+2/-1
1.2max.
1.0max.
(0.087max.)
3.2max.
(0.126max.)
4.2max.
(2.047+0.079/-0.039)
(0.047 max.)
(0.039max.)
(0.018±0.002)
0.55±0.05
Multilayer type
075
7.5
(0.126max.)
(0.165max.)
(0.022±0.002)
(0.295)
Unit:mm(inch)
※Radial taping is available for 075 type (Optional)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_pack_e-E02R01
Axial Leaded Ceramic Capacitors
■RELIABILITY DATA
1. Operating Temperature Range
Class1(Temperature
Multilayer type
Compensating)
Multilayer type
Specified Value
-25 to +85℃
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
2. Storage Temperature Range
Class1(Temperature
Multilayer type
Compensating)
Multilayer type
Specified Value
-25 to +85℃
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
3. Rate Voltage
Specified Value
Class1(Temperature
Compensating)
Multilayer type
50VDC
Multilayer type
16VDC, 25VDC, 35VDC, 50VDC
10VDC, 16VDC, 25VDC, 35VDC, 50VDC
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
4. Withstanding Voltage
Between terminals
Specified Value
No abnorminality
Applied voltage
: Rate Voltage×3(Class 1)
: Rate Voltage×2.5(Class 2)
: 1 to 5 sec.
Test Methods and
Remarks
Duration
Charge/discharge current
: 50mA max.(Class 1,2)
Between terminals and body
Specified Value
No abnorminality
Metal globule method
Applied voltage
: Rate Voltage×2.5
: 1 to 5 sec.
Test Methods and
Remarks
Duration
Charge/Discharge current
: 50mA max.
5.Insulation Resistance
Class1(Temperature
Compensating)
Multilayer type
10000MΩ min.
Rate voltage : 16VDC
1200pF~22000pF(Item△J)
220000pF
: 5000MΩ min
: 500MΩ min
: 200MΩ min
: 100MΩ min
: 50MΩ min
: 20MΩ min
: 20MΩ min
470000pF
1000000pF
2200000pF
4700000pF
10000000pF
Rate voltage : 25VDC
10000000pF
: 20MΩ min
Specified Value
Multilayer type
Rate voltage : 35VDC
1000000pF
Class2(High Dielectric)
(Characteristics:B, B5)
: 100MΩ min
: 50MΩ min
: 20MΩ min
: 10MΩ min
2200000pF
4700000pF
10000000pF
Rate voltage : 50VDC
100pF~39000pF
47000pF~100000pF
220000pF
: 5000MΩ min
: 1000MΩ min
: 500MΩ min
: 200MΩ min
: 100MΩ min
: 40MΩ min
470000pF
1000000pF
2200000pF
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
4700000pF
: 10MΩ min
Rate voltage : 10VDC
4700000pF
: 50MΩ min
: 25MΩ min
10000000pF
Rate voltage : 16VDC
220000pF
: 500MΩ min
: 500MΩ min
: 250MΩ min
: 125MΩ min
470000pF
1000000pF
2200000pF
Multilayer type
(Characteristics:F)
Rate voltage : 25VDC
10000pF~47000pF(Item△J)
Rate voltage : 35VDC
10000000pF
: 1000MΩ min
: 25MΩ min
Rate voltage : 50VDC
10000pF~100000pF
220000pF~470000pF
1000000pF
: 1000MΩ min
: 500MΩ min
: 250MΩ min
Test Methods and Applied voltage
: Rate voltage
: 60±5 sec.
Remarks
Duration
6.Capacitance
±0.5pF
±5%
Class1(Temperature
Compensating)
Multilayer type
±10%
Specified Value
Multilayer type
±10%, ±20%(Item△J)
+80/-20%
(Characteristics:B, B5)
Class2(High Dielectric)
Measuring frequency
Multilayer type
(Characteristics:F)
: 1MHz±10%
(Class1 : C≦1000pF)
: 1kHz±10%
: 1kHz±10%
: 120Hz±10%
: 1.0±0.5Vrms
: 1.0±0.2Vrms
: 1.0±0.2Vrms
: 0.5±0.1Vrms
: None
(Class1 : C>1000pF)
(Class2 : C≦10μF)
(Class2 : C>10μF)
(Class1 : C≦1000pF)
(Class1 : C>1000pF)
(Class2 : C≦10μF)
(Class2 : C>10μF)
Test Methods and
Remarks
Measuring voltage
Bias application
7.Q or Tangent of Loss Angle(tanδ)
30pF or under : Q≧400+20C
Class1(Temperature
Compensating)
Multilayer type
33pF or over : Q≧1000
C:Nominal Capacitance[pF]
Rate voltage : 16VDC
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Rate voltage : 25VDC
10000000pF
: 3.5% max
: 5.0% max
: 7.5% max
: 12.5% max
: 12.5% max
Multilayer type
Rate voltage : 35VDC
1000000pF
(Characteristics:B, B5)
: 5.0% max
: 7.5% max
: 12.5% max
2200000pF~4700000pF
10000000pF
Rate voltage : 50VDC
100pF~39000pF
Specified Value
: 3.5% max
: 5.0% max
: 12.5% max)
: 12.5% max
Class2(High Dielectric)
47000pF~1000000pF
(1000000pF/B5
2200000pF~4700000pF
Rate voltage : 10VDC
4700000pF~10000000pF
Rate voltage : 16VDC
220000pF
: 17.5% max
: 10.0% max
: 10.0% max
: 17.5% max
: 15.0% max
470000pF
Multilayer type
1000000pF
(Characteristics:F)
2200000pF
Rate voltage : 25VDC
10000pF~47000pF(Item△J)
Rate voltage : 35VDC
: 7.5% max
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
10000000pF
: 17.5% max
Rate voltage : 50VDC
10000pF~100000pF
220000pF~470000pF
1000000pF
: 7.5% max
: 10.0% max
: 15.0% max
Measuring frequency
Measuring voltage
Bias application
: 1MHz±10%
: 1kHz±10%
: 1kHz±10%
: 120Hz±10%
: 1.0±0.5Vrms
: 1.0±0.2Vrms
: 1.0±0.2Vrms
: 0.5±0.1Vrms
: None
(Class1 : C≦1000pF)
(Class1 : C>1000pF)
(Class2 : C≦10μF)
(Class2 : C>10μF)
(Class1 : C≦1000pF)
(Class1 : C>1000pF)
(Class2 : C≦10μF)
(Class2 : C>10μF)
Test Methods and
Remarks
8.Capacitance:Change due to Temperature or Rate of Capacitance Change
When voltage is not applied
Class1(Temperature
Multilayer type
CH : 0±60
Compensating)
SL : -350~+1000 [ppm/℃]
Multilayer type
Specified Value
±10%(B5 : ±15%)
+30/-85 %
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
Measurement of capacitance at 20℃ and 85℃, -25℃ shall be made to calculate temperature characteristic by the following equation.
(Class 1)
(C85-C20)
×106(ppm/℃)
C20×△T
Change of maximum capacitance deviation in step 1 to 5(Class2)
Step
Temperature(℃)
Test Methods and
Remarks
1
2
3
4
5
20
-25
20(Reference temperature)
85
20
※In the B5 characteristics is, the Temperatures of step 1,3, and 5 are 25℃.
9.Terminal Strength
Tensile
Class1(Temperature
Multilayer type
Compensating)
Multilayer type
Specified Value
No abnomalities, such as cuts or looseness of terminals.
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
Apply the stated tensile force progressively in the direction to draw terminal.
Nominal wire diameter[mm]
0.45・0.55
Tensile force[N]
19.6
Duration[s]
5
Test Methods and
Remarks
Torsional
Class1(Temperature
Compensating)
Multilayer type
Multilayer type
Specified Value
No abnomalities, such as cuts or looseness of terminals.
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position.
This operation is done over a period of 5 sec. Then second bend in the opposite direction shall be made.
Number of bends : 2 times
Test Methods and
Remarks
Nominal wire diameter[mm]
0.45・0.55
Bending force[N]
2.45
Mass weight[kg]
0.25
10.Resistance to Vibration
Class1(Temperature
Compensating)
Appearance : No significant abnomality
Withstanding Voltage : No abnomality
Specified Value
Multilayer type
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Capacitance :
4.7pF or under
5.6pF~8.2pF
: Within ±0.5pF
: Within±10%
: Within±5%
10pF or over
Q :
30pF or under
33pF or over
: Q≧400+20C
: Q≧1000
Insulation resistance
C : Nominal Capacitance [pF]
: 10000MΩ min
Appearance : No significant abnomality
Withstanding Voltage : No abnomality
Rate Voltage : 16VDC
Capacitance
1200pF~22000pF(Item△J)
220000pF~10000000pF
tanδ :
: Within ±20%
: Within ±10%
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation Resistance :
1200pF~22000pF(Item△J)
220000pF
: 3.5% max
: 5.0% max
: 7.5% max
: 12.5% max
: 5000MΩ min
: 500MΩ min
: 200MΩ min
: 100MΩ min
: 50MΩ min
: 20MΩ min
470000pF
1000000pF
2200000pF
4700000pF~10000000pF
Rate Voltage : 25VDC
Capacitance : Within ±10%
tanδ :
10000000pF
: 12.5% max
Insulation Resistance :
10000000pF
: 20MΩ min
Multilayer type
Rate Voltage : 35VDC
Capacitance : Within ±10%
tanδ :
(Characteristics:B, B5)
1000000pF
: 5.0% max
: 7.5% max
: 12.5% max
2200000pF~4700000pF
10000000pF
Class2(High Dielectric)
Insulation Resistance :
1000000pF
: 100MΩ min
: 50MΩ min
: 20MΩ min
: 10MΩ min
2200000pF
4700000pF
10000000pF
Rate Voltage : 50VDC
Capacitance : Within ±10%
tanδ :
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
2200000pF~4700000pF
Insulation Resistance :
100pF~39000pF
47000pF~100000pF
220000pF
: 3.5% max
: 5.0% max
: 12.5% max)
: 12.5% max
: 5000MΩ min
: 1000MΩ min
: 500MΩ min
: 200MΩ min
: 100MΩ min
: 40MΩ min
: 10MΩ min
470000pF
1000000pF
2200000pF
4700000pF
Appearance : No significant abnomality
Withstanding Voltage : No abnomality
Rate Voltage : 10VDC
Capacitance
: Within +80/-20%
: 17.5% max
Multilayer type
tanδ :
(Characteristics:F)
4700000pF~10000000pF
Insulation Resistance :
4700000pF
: 50MΩ min
: 25MΩ min
10000000pF
Rate Voltage : 16VDC
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Capacitance
: Within +80/-20%
tanδ :
220000pF
: 10.0% max
: 10.0% max
: 17.5% max
: 15.0% max
470000pF
1000000pF
2200000pF
Insulation Resistance :
220000pF
: 500MΩ min
: 500MΩ min
: 250MΩ min
: 125MΩ min
470000pF
1000000pF
2200000pF
Rate Voltage : 25VDC
Capacitance
: Within +80/-20%
: 7.5% max
tanδ :
10000pF~47000pF(Item△J)
Insulation Resistance :
10000pF~47000pF(Item△J)
Rate Voltage : 35VDC
Capacitance
: 1000MΩ min
: Within +80/-20%
: 17.5% max
tanδ :
10000000pF
Insulation Resistance
10000000pF
: 25MΩ min
Rate Voltage : 50VDC
Capacitance
: Within +80/-20%
tanδ :
10000pF~100000pF
220000pF~470000pF
1000000pF
: 7.5% max
: 10.0% max
: 15.0% max
Insulation Resistance :
10000pF~100000pF
220000pF~470000pF
1000000pF
: 1000MΩ min
: 500MΩ min
: 250MΩ min
According to JIS C 5102 clause 8.2
Vibration type
Directions
: A
: 2 hrs each in X, Y and Z directions
: 6 hrs
Test Methods and
Remarks
Total
Frequency range
Amplitude
: 10 to 55 to 10Hz(1min)
: 1.5mm
Mountin method
: Soldering onto the PC board
11.Free Fall
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Capacitance
4.7pF or under
5.6pF~8.2pF
10pF or over
: Within ±0.5pF
: Within ±10%
: Within ±5%
Class1(Temperature
Compensating)
Multilayer type
Q :
30pF or under
33pF or over
: Q≧400+20C
: Q≧1000
Insulation resistance
C : Nominal Capacitance [pF]
: 10000MΩ min
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Specified Value
Rate Voltage:16VDC
Capacitance:
1200pF~22000pF(Item△J)
220000pF~10000000pF
tanδ:
:Within ±20%
:Within ±10%
Multilayer type
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation resistance:
1200pF~22000pF(Item△J)
220000pF
:3.5% max
:5.0% max
:7.5% max
:12.5% max
Class2(High Dielectric)
(Characteristics:B, B5)
:5000MΩ min
:500MΩ min
:200MΩ min
:100MΩ min
470000pF
1000000pF
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
2200000pF
:50MΩ min
:20MΩ min
4700000pF~10000000pF
Rate Voltage:25VDC
Capacitance:Within ±10%
tanδ:
10000000pF
:12.5% max
Insulation resistance:
10000000pF
:20MΩ min
Rate Voltage:35VDC
Capacitance:Within ±10%
tanδ:
1000000pF
:5.0% max
:7.5% max
:12.5% max
2200000pF~4700000pF
10000000pF
Insulation resistance:
1000000pF
:100MΩ min
:50MΩ min
:20MΩ min
:10MΩ min
2200000pF
4700000pF
10000000pF
Rate Voltage:50VDC
Capacitance:Within ±10%
tanδ:
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
2200000pF~4700000pF
Insulation resistance:
100pF~39000pF
47000pF~100000pF
220000pF
:3.5% max
:5.0% max
:12.5% max)
:12.5% max
:5000MΩ min
:1000MΩ min
:500MΩ min
:200MΩ min
:100MΩ min
:40MΩ min
:10MΩ min
470000pF
1000000pF
2200000pF
4700000pF
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate Voltage:10VDC
Capacitance
:Within +80/-20%
:17.5% max
tanδ:
4700000pF~10000000pF
Insulation resistance:
4700000pF
:50MΩ min
:25MΩ min
10000000pF
Rate Voltage:16VDC
Capacitance
: Within+80/-20%
tanδ:
220000pF
470000pF
:10.0% max
:10.0% max
:17.5% max
:15.0% max
1000000pF
2200000pF
Insulation resistance:
220000pF
Multilayer type
:500MΩ min
:500MΩ min
:250MΩ min
:125MΩ min
(Characteristics:F)
470000pF
1000000pF
2200000pF
Rate Voltage:25VDC
Capacitance
: Within +80/-20%
:7.5% max
tanδ:
10000pF~47000pF(Item△J)
Insulation resistance:
10000pF~47000pF(Item△J)
Rate Voltage:35VDC
Capacitance
:1000MΩ min
: Within +80/-20%
:17.5% max
tanδ:
10000000pF
Insulation resistance:
10000000pF
:25MΩ min
Rate Voltage:50VDC
Capacitance
: Within +80/-20%
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
tanδ:
10000pF~100000pF
220000pF~470000pF
1000000pF
:7.5% max
:10.0% max
:15.0% max
Insulation resistance:
10000pF~100000pF
220000pF~470000pF
1000000pF
:1000MΩ min
:500MΩ min
:250MΩ min
Drop Test
: Free fall
: Floor
Test Methods and Impact material
Remarks
Height
Total number of drops
: 1 m
: 5 times
12.Body Strength
Class1(Temperature
Compensating)
Multilayer type
Multilayer type
Specified Value
No abnomality such as damage.
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
Applied force
Duration
Speed
: 19.6N
: 5 sec.
: Shall attain to specified force in 2 sec.
0.5R
Test Methods and
Remarks
90°
2.0mm
1.5mm(025type)
13.Solderability
Specified Value
Class1(Temperature
Compensating)
Multilayer type
Multilayer type
At least 75% of lead surface is covered with new solder.
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
Test Methods and Solder temperature
: 230±5℃
: 2±0.5 sec.(This test may be applicable after 6 months storage.)
Remarks
Duration
14.Soldering
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Capacitance change:
8.2pF or under
10pF or over
:Within ±0.25pF
:Within ±2.5%
Class1(Temperature
Compensating)
Multilayer type
Q:
30pF or under
:Q≧400+20C
:Q≧1000
33pF or over
Insulation resistance
C:Nominal Capacitance [pF]
:10000MΩ min
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Specified Value
Rate Voltage:16VDC
Capacitance change:
1200pF~22000pF(Item△J)
220000pF~10000000pF
tanδ:
:Within±7.5%
:Within±10.0%
Multilayer type
Class2(High Dielectric)
(Characteristics:B, B5)
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation resistance:
1200pF~22000pF(Item△J)
220000pF
:3.5% max
:5.0% max
:7.5% max
:12.5% max
:5000MΩ min
:500MΩ min
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
470000pF
:200MΩ min
:100MΩ min
:50MΩ min
:20MΩ min
1000000pF
2200000pF
4700000pF~10000000pF
Rate Voltage:25VDC
Capacitance change:
10000000pF
:Within ±10.0%
:12.5% max
tanδ:
10000000pF
Insulation resistance:
10000000pF
:20MΩ min
Rate Voltage:35VDC
Capacitance change:
1000000pF~10000000pF
tanδ:
:Within ±10.0%
1000000pF
:5.0% max
:7.5% max
:12.5% max
2200000pF~4700000pF
10000000pF
Insulation resistance:
1000000pF
:100MΩ min
:50MΩ min
:20MΩ min
:10MΩ min
2200000pF
4700000pF
10000000pF
Rate Voltage:50VDC
Capacitance change:
100pF~39000pF
47000pF~1000000pF
tanδ:
:Within ±7.5%
:Within ±10.0%
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
2200000pF~4700000pF
Insulation resistance:
100pF~39000pF
47000pF~100000pF
220000pF
:3.5% max
:5.0% max
:12.5% max)
:12.5% max
:5000MΩ min
:1000MΩ min
:500MΩ min
:200MΩ min
:100MΩ min
:40MΩ min
:10MΩ min
470000pF
1000000pF
2200000pF
4700000pF
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate Voltage:10VDC
Capacitance change
tanδ:
:Within ±20%
:17.5% max
4700000pF~10000000pF
Insulation resistance:
4700000pF
:50MΩ min
:25MΩ min
10000000pF
Rate Voltage:16VDC
Capacitance change
tanδ:
:Within ±20%
220000pF~470000pF
1000000pF
:10.0% max
:17.5% max
:15.0% max
Multilayer type
(Characteristics:F)
2200000pF
Insulation resistance:
220000pF~470000pF
1000000pF
:500MΩ min
:250MΩ min
:125MΩ min
2200000pF
Rate Voltage:25VDC
Capacitance change
tanδ:
:Within ±20%
:7.5% max
10000pF~47000pF(Item△J)
Insulation resistance:
10000pF~47000pF(Item△J)
Rate Voltage:35VDC
Capacitance change
tanδ:
:1000MΩ min
:Within ±20%
:17.5% max
10000000pF
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Insulation resistance:
10000000pF
:25MΩ min
:Within 20.0%
Rate Voltage:50VDC
Capacitance change:
10000pF~1000000pF
tanδ:
10000pF~100000pF
220000pF~470000pF
1000000pF
:7.5% max
:10.0% max
:15.0% max
Insulation resistance:
10000pF~100000pF
220000pF~470000pF
1000000pF
:1000MΩ min
:500MΩ min
:250MΩ min
Solder temperature
Duration
: 270±5℃
: 5±0.5 sec.
Immersed conditions
: Inserted into the PC board(with t=1.6mm, hole=1.0mm diameter)
Test Methods and Preconditioning
Remarks
: 1 hr of preconditioning at 150 +0/-10℃ followed by 48±4 hrs of recovery under the standard
condition.
Recovery
: Recovery for the following period under the standard condition after the test.
24±2 hrs(Class 1)
48±4 hrs(Class 2)
15.Resistance to Solvent
Class1(Temperature
Multilayer type
Compensating)
Multilayer type
Specified Value
No significant abnormality in appearance and legible marking.
(Characteristics:B, B5)
Class2(High Dielectric)
Multilayer type
(Characteristics:F)
According to JIS C 5102 clause 8.7.4.
Type of test
: Method 1
Test Methods and
Remarks
Solvent temperature
Duration
: 20 to 25℃
: 30±5 sec.
Solvent Type
: A in Table 23, Isopropyl alcohol
16.Thermal Shock
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Capacitance change:
8.2pF or under
10pF or over
:Within ±0.5pF
:Within ±5.0%
Class1(Temperature
Compensating)
Multilayer type
Q:
8.2pF or under
10pF~30pF
:Q≧200+10C
:Q≧275+2.5C
:Q≧350
33pF or over
Insulation resistance
C : Nominal Capacitance [pF]
:1000MΩ min
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:16VDC
Capacitance change:
1200pF~22000pF(Item△J)
220000pF~10000000pF
tanδ:
:Within ±12.5%
:Within ±15.0%
Specified Value
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation resistance:
1200pF~22000pF(Item△J)
220000pF
:5.0% max
:7.5% max
:10.0% max
:22.5% max
Multilayer type
Class2(High Dielectric)
(Characteristics:B, B5)
:1000MΩ min
:125MΩ min
:50MΩ min
:25MΩ min
:12.5MΩ min
:5MΩ min
470000pF
1000000pF
2200000pF
4700000pF~10000000pF
Rate voltage:25VDC
Capacitance change:
10000000pF
:Within ±15.0%
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
tanδ:
10000000pF
:15.0% max
:5MΩ min
Insulation resistance:
10000000pF
Rate voltage:35VDC
Capacitance change:
1000000pF
:Within ±15.0%
:Within ±15.0%
:Within ±15.0%
2200000pF~4700000pF
10000000pF
tanδ:
1000000pF
:7.5% max
:10.0% max
:22.5% max
2200000pF~4700000pF
10000000pF
Insulation resistance:
1000000pF
:50MΩ min
:25MΩ min
:5MΩ min
2200000pF
4700000pF~10000000pF
Rate voltage:50VDC
Capacitance change:
100pF~39000pF
47000pF~4700000pF
(1000000pF/B5
tanδ:
:Within ±12.5%
:Within ±15.0%
:Within ±22.5%)
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
2200000pF~47000000pF
Insulation resistance:
100pF~39000pF
47000pF~100000pF
220000pF
:5.0% max
:7.5% max
:Within ±17.5%)
:22.5% max
:1000MΩ min
:500MΩ min
:250MΩ min
:100MΩ min
:50MΩ min
:20MΩ min
:5MΩ min
470000pF
1000000pF
2200000pF
4700000pF
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:10VDC
Capacitance change
tanδ:
:Within ±30.0%
:20.0% max
4700000pF~10000000pF
Insulation resistance:
4700000pF
:10MΩ min
:5MΩ min
10000000pF
Rate voltage:16VDC
Capacitance change
tanδ:
:Within ±30.0%
220000pF~470000pF
1000000pF
:15.0% max
:22.5% max
:17.5% max
2200000pF
Insulation resistance:
220000pF
Multilayer type
:100MΩ min
:50MΩ min
:25MΩ min
:25MΩ min
(Characteristics:F)
470000pF
1000000pF
2200000pF
Rate voltage:25VDC
Capacitance change
tanδ
:Within ±30%
:
10000pF~47000pF(Item△J)
Insulation resistance:
10000pF~47000pF(Item△J)
Rate voltage:35VDC
Capacitance change
tanδ:
:12.5% max
:500MΩ min
:Within ±30.0%
:20.0% max
10000000pF
Insulation resistance:
10000000pF
:5MΩ min
Rate voltage:50VDC
Capacitance change:
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
10000pF~1000000pF
tanδ:
:Within ±30.0%
10000pF~100000pF
220000pF~470000pF
1000000pF
:12.5% max
:15.0% max
:17.5% max
Insulation resistance:
10000pF~100000pF
220000pF~470000pF
1000000pF
:500MΩ min
:250MΩ min
:50MΩ min
Conditions for 1 cycle
Step
Temperature[℃]
Duration[min.]
Within 3
30±3
1
2
3
4
5
Room temperature
-25+0/-3
Room temperature
+85+3/-0
Within 3
30±3
Test Methods and
Remarks
Room temperature
Within 3
Number of cycles
Preconditioning
Recovery
: 5
: 1 hr of preconditioning at 150 +0/-10℃ followed by 48±4 hrs of recovery under the standard condition.
: Recovery for the following period under the standard condition after the removal from test chamber.
24±2 hrs( Class 1)
48±4 hrs( Class 2)
17.Damp Heat(steady state)
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Capacitance change:
8.2pF or under
10pF or over
:Within ±0.5pF
:Within ±5.0%
Class1(Temperature
Multilayer type
Q:
Compensating)
8.2pF or under
10pF~30pF
:Q≧200+10C
:Q≧275+2.5C
:Q≧350
33pF or over
Insulation resistance
C : Nominal Capacitance [pF]
:1000MΩ min
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:16VDC
Capacitance change:
1200pF~22000pF(Item△J)
220000pF~10000000pF
tanδ:
:Within ±12.5%
:Within ±15.0%
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation resistance:
1200pF~22000pF(Item△J)
220000pF
:5.0% max
:7.5% max
:10.0% max
:22.5% max
Specified Value
:1000MΩ min
:125MΩ min
:50MΩ min
:25MΩ min
:12.5MΩ min
:5MΩ min
470000pF
1000000pF
2200000pF
Multilayer type
Class2(High Dielectric)
4700000pF~10000000pF
Rate voltage:25VDC
Capacitance change:
10000000pF
(Characteristics:B, B5)
:Within ±15.0%
:15.0% max
tanδ:
10000000pF
Insulation resistance:
10000000pF
:5MΩ min
Rate voltage:35VDC
Capacitance change:
1000000pF
:Within ±15.0%
:Within ±15.0%
:Within ±15.0%
2200000pF~4700000pF
10000000pF
tanδ:
1000000pF
2200000pF~4700000pF
10000000pF
:10.0% max
:10.0% max
:22.5% max
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Insulation resistance:
1000000pF
:50MΩ min
:25MΩ min
:5MΩ min
2200000pF
4700000pF~10000000pF
Rate voltage:50VDC
Capacitance change:
100pF~39000pF
47000pF~4700000pF
(1000000pF/B5
tanδ:
:Within ±12.5%
:Within ±15.0%
:Within ±22.5%)
100pF~39000pF
47000pF~1000000pF
(1000000/B5
:5.0% max
:7.5% max
:17.5% max)
:22.5% max
2200000pF~4700000pF
Insulation resistance:
100pF~39000pF
47000pF~100000pF
220000pF
:1000MΩ min
:500MΩ min
:250MΩ min
:100MΩ min
:50MΩ min
:20MΩ min
:5MΩ min
470000pF
1000000pF
2200000pF
4700000pF
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:10VDC
Capacitance change
tanδ:
:Within ±30.0%
:20.0% max
4700000pF~10000000pF
Insulation resistance:
4700000pF
:10MΩ min
:5MΩ min
10000000pF
Rate voltage:16VDC
Capacitance change
tanδ:
:Within ±30.0%
220000pF~470000pF
1000000pF
:15.0% max
:22.5% max
:17.5% max
2200000pF
Insulation resistance:
220000pF
:100MΩ min
:50MΩ min
:25MΩ min
:25MΩ min
470000pF
1000000pF
2200000pF
Rate voltage:25VDC
Capacitance change
tanδ:
Multilayer type
:Within ±30%
:12.5% max
(Characteristics:F)
10000pF~47000pF(Item△J)
Insulation resistance:
10000pF~47000pF(Item△J)
Rate voltage:35VDC
Capacitance change
tanδ:
:500MΩ min
:Within ±30.0%
:20.0% max
10000000pF
Insulation resistance:
10000000pF
:5MΩ min
Rate voltage:50VDC
Capacitance change:
10000pF~1000000pF
tanδ:
:Within ±30.0%
10000pF~100000pF
220000pF~470000pF
1000000pF
:12.5% max
:15.0% max
:17.5% max
Insulation resistance:
10000pF~100000pF
220000pF~470000pF
1000000pF
:500MΩ min
:250MΩ min
:50MΩ min
Temperature
Test Methods and Humidity
: 40±2℃
: 90 to 95 % RH
: 500hrs+24/-0 hrs
Remarks
Duration
Preconditioning
: 1 hr of preconditioning at 150+0/-10 ℃ followed by 48±4 hrs of recovery under the standard condition.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Recovery
: 24±2 hrs of recovery under the standard condition after the removal from test chamber.
(Class 1)
: 1 hr of preconditioning at 150+10/-0 ℃ followed by 48±4 hrs of recovery under the standard condition after
the removal from chamber. (Class 2)
18.Loading under Damp Heat
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Capacitance change:
8.2pF or under
10pF or over
:Within ±0.75pF
:Within ±7.5%
Class1(Temperature
Multilayer type
Compensating)
Q:
30pF or under
33pF or over
:Q≧100+10/3*C
:Q≧200
Insulation resistance
C : Nominal Capacitance [pF]
:500MΩ min
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:16VDC
Capacitance change:
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~10000000pF
tanδ:
:Within ±12.5%
:Within ±15.0%
:Within ±22.5%
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation resistance:
1200pF~22000pF(Item△J)
220000pF
:5.0% max
:7.5% max
:10.0% max
:22.5% max
:500MΩ min
:50MΩ min
:25MΩ min
:12.5MΩ min
:5.0MΩ min
:2.5MΩ min
470000pF
1000000pF
2200000pF
4700000pF~10000000pF
Rate voltage:25VDC
Capacitance change:
10000000pF
Specified Value
:Within ±22.5%
:22.5% max
tanδ:
10000000pF
Insulation resistance:
10000000pF
:2.5MΩ min
Multilayer type
Class2(High Dielectric)
Rate voltage:35VDC
Capacitance change:
1000000pF
(Characteristics:B, B5)
:Within ±15.0%
:Within ±15.0%
:Within ±22.5%
2200000pF
4700000pF~10000000pF
tanδ:
1000000pF
:10.0% max
:10.0% max
:22.5% max
2200000pF~4700000pF
10000000pF
Insulation resistance:
1000000pF
:12.5MΩ min
:5.0MΩ min
:2.5MΩ min
2200000pF
4700000pF~10000000pF
Rate voltage:50VDC
Capacitance change:
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
:Within ±12.5%
:Within ±15.0%
:Within ±22.5%)
:Within ±22.5%
2200000pF~4700000pF
tanδ:
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
:5.0% max
:7.5% max
:17.5% max)
:22.5% max
2200000pF~4700000pF
Insulation resistance:
100pF~39000pF
47000pF~100000pF
:500MΩ min
:250MΩ min
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
220000pF
470000pF
1000000pF
2200000pF
4700000pF
:125MΩ min
:25MΩ min
:12.5MΩ min
:10MΩ min
:2.5MΩ min
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:10VDC
Capacitance change
tanδ:
:Within ±30.0%
:20.0% max
4700000pF~10000000pF
Insulation resistance:
4700000pF
:5MΩ min
10000000pF
:2.5MΩ min
Rate voltage:16VDC
Capacitance change
tanδ:
:Within ±30.0%
220000pF~470000pF
1000000pF
:15.0% max
:22.5% max
:17.5% max
2200000pF
Insulation resistance:
220000pF
:50MΩ min
:25MΩ min
:12.5MΩ min
:12.5MΩ min
470000pF
1000000pF
2200000pF
Rate voltage:25VDC
Capacitance change
tanδ:
Multilayer type
:Within ±30.0%
:12.5% max
(Characteristics:F)
10000pF~47000pF(Item△J)
Insulation resistance:
10000pF~47000pF(Item△J)
Rate voltage:35VDC
Capacitance change
tanδ:
:250MΩ min
:Within ±30.0%
:20.0% max
10000000pF
Insulation resistance:
10000000pF
:2.5MΩ min
Rate voltage:50VDC
Capacitance change
10000pF~1000000pF
tanδ:
:
:Within ±30.0%
10000pF~100000pF
220000pF~470000pF
1000000pF
:12.5% max
:15.0% max
:17.5% max
Insulation resistance:
10000pF~100000pF
220000pF~470000pF
1000000pF
:250MΩ min
:125MΩ min
:25MΩ min
Temperature
Humidity
: 40±2℃
: 90 to 95 % RH
: 500 +24/-0 hrs
: Rate voltage
Duration
Applied voltage
Preconditioning
Recovery
Test Methods and
Remarks
: 1 hr of preconditioning at 150 +0/-10 ℃ followed by 48±4 hrs of recovery under the standard condition.
: 24±2 hrs of recovery under the standard condition after the removal from test cham-ber.
(Class 1)
: 1 hr of preconditioning at 150+10/-0 ℃ followed by 48±4 hrs of recovery under the standard condition after
the removal from chamber. (Class 2)
19.High Temperature Lading Test
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Capacitance change:
8.2pF or under
10pF or over
Q:
:Within ±0.3pF
:Within ±3.0%
Class1(Temperature
Compensating)
Specified Value
Multilayer type
8.2pF or under
10pF~30pF
33pF or over
Insulation resistance
:Q≧200+10C
:Q≧275+2.5C
:Q≧350
:1000MΩ min
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
C : Nominal Capacitance [pF]
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:16VDC
Capacitance change:
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~10000000pF
tanδ:
:Within ±12.5%
:Within ±15.0%
:Within ±22.5%
1200pF~22000pF(Item△J)
220000pF~470000pF
1000000pF~2200000pF
4700000pF~10000000pF
Insulation resistance:
1200pF~22000pF(Item△J)
220000pF
:5.0% max
:7.5% max
:10.0% max
:22.5% max
:1000MΩ min
:125MΩ min
:50MΩ min
:25MΩ min
:12.5MΩ min
: 5.0MΩ min
470000pF
1000000pF
2200000pF
4700000pF~10000000pF
Rate voltage:25VDC
Capacitance change:
10000000pF
:Within ±22.5%
:22.5% max
tanδ:
10000000pF
Insulation resistance:
10000000pF
:5MΩ min
Rate voltage:35VDC
Capacitance change:
1000000pF
Multilayer type
:Within ±15.0%
:Within ±15.0%
:Within ±22.5%
(Characteristics:B, B5)
2200000pF
4700000pF~10000000pF
tanδ:
1000000pF
:10.0% max
:10.0% max
:22.5% max
2200000pF~4700000pF
10000000pF
Class2(High Dielectric)
Insulation resistance:
1000000pF
:25MΩ min
:25MΩ min
:5MΩ min
2200000pF
4700000pF~10000000pF
Rate voltage:50VDC
Capacitance change:
100pF~39000pF
47000pF~1000000pF
(1000000pF/B5
2200000pF~4700000pF
tanδ:
:Within ±12.5%
:Within ±15.0%
:Within ±22.5%)
:Within ±22.5%
100pF~39000pF
47000pF~1000000pF
(1000000/B5
:5.0% max
:7.5% max
:17.5% max)
:22.5% max
2200000pF~4700000pF
Insulation resistance:
100pF~39000pF
47000pF~100000pF
220000pF
:1000MΩ min
:500MΩ min
:250MΩ min
:100MΩ min
:50MΩ min
:20MΩ min
:5MΩ min
470000pF
1000000pF
2200000pF
4700000pF
Appearance:No significant abnomality
Withstanding Voltage:No abnomality
Rate voltage:10VDC
Capacitance change
tanδ:
:Within ±30.0%
:20.0% max
Multilayer type
(Characteristics:F)
4700000pF~10000000pF
Insulation resistance:
4700000pF
:10MΩ min
:5MΩ min
10000000pF
Rate voltage:16VDC
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Capacitance change
tanδ:
:Within ±30.0%
220000pF~470000pF
1000000pF
:15.0% max
:22.5% max
:17.5% max
2200000pF
Insulation resistance:
220000pF
:100MΩ min
:50MΩ min
:25MΩ min
:25MΩ min
470000pF
1000000pF
2200000pF
Rate voltage:25VDC
Capacitance change
tanδ:
:Within ±30%
:10.0% max
10000pF~47000pF(Item△J)
Insulation resistance:
10000pF~47000pF(Item△J)
Rate voltage:35VDC
Capacitance change
tanδ:
:500MΩ min
:Within ±30.0%
:20.0% max
10000000pF
Insulation resistance:
10000000pF
:5MΩ min
Rate voltage:50VDC
Capacitance change:
10000pF~1000000pF
tanδ:
:Within 30.0%
10000pF~100000pF
220000pF~470000pF
1000000pF
:10.0% max
:12.5% max
:17.5% max
Insulation resistance:
10000pF~100000pF
220000pF~470000pF
1000000pF
:500MΩ min
:250MΩ min
:50MΩ min
Temperature
Duration
: 85 +3/-0 ℃
: 1000 +48/-0 hrs
: Rate voltage×2
Applied voltage
: Rate voltage×1.5
Class 2: B,B5 1000000pF(025Type)
Test Methods and
Remarks
: B,B5 220000pF~10000000pF(050Type, 075Type)
Preconditioning
Recovery
: 1 hr of preconditioning at 150 +10-0 ℃ followed by 48±4 hrs of recovery under the standard condition.
: 24±2hrs of recovery under the standard condition after the removal from test chamber.
(Class1)
: 1 hr of preconditioning at 150+10-0 ℃ followed by 48±4 hrs of recovery under the standard condition after the
removal from chamber. (Class 2)
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air
pressure.Unless otherwise specified, all the tests are conducted under the "standard condition."
Withstanding voltage is also referred to as "voltage proof" under IEC specifications.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_reli_e-E02R01
Precautions on the use of Axial Leaded Ceramic Capacitors
■PRECAUTIONS
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social
ramifications. As such, any capacitors to be used in such equipment may require higher safety and/or reliability considerations and
should be clearly differentiated from components used in general purpose applications.
◆Verification of Rated voltage( DC rated voltage)
1. The operating voltage for capacitors must always be lower than their rated values.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than the rated value of the capacitor
chosen. For a circuit where both an AC and a pulse voltage may be present, the sum of their peak voltages should also be lower than
the capacitor's rated voltage.
◆Self-generated heat (Verification of Temperature)
Precautions
1. If the capacitors specified only for DC use are used in AC or pulse circuits, the AC or a pulse current can generate heat inside the
capacitor so the self-generated temperature rise should be limited to within 20℃. The surface temperature measured should include
this self-temperature rise. Therefore, it is required to limit capacitor surface temperature including self -generated heat should not
exceed the maximum operating temperature of +85℃.
◆Operating Environment precautions
1. Capacitors should not be used in the following environments:
(1)Environmental conditions to avoid
a. exposure to water or salt water.
b. exposure to moisture or condensation.
c. exposure to corrosive gases (such as hydrogen sulfide, sulfurous acid, chlorine, and ammonia)
1-1. When an AC or a pulse voltage is applied to capacitors specified for DC use, even if the voltage is less than the rated voltage, the AC
current or pulse current running through the capacitor will cause the capacitor to self-generate heat because of the loss
characteristics.
The amount of heat generated depends on the dielectric materials used, capacitance, applied voltage, frequency, voltage waveform, etc.
The surface temperature changes due to emitted heat which differs by capacitor shape or mounting method.
Please contact Taiyo Yuden with any questions regarding emitted heat levels in your particular application. It is recommended the
temperature rise be measured in the actual circuit to be used.
1-2. For capacitors, the voltage and frequency relationship is generally determined by peak voltage at low frequencies, and by self-generated
heat at high frequencies. (Refer to the following curve.)
Technical
considerations
Sum of the peak voltage
(peak to peak)
Self-generated heat limit
Difference in
self-generated heat
relative to capacitance
Frequency
2. PCB Design
◆Design of the capacitor mount
1. When capacitors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not it will
Precautions
cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs. As
a result, humidity resistance performance would be lost and may lead to a reduction in insulation resistance and cause a withstand
voltage failure.
3. Considerations for automatic insertion
◆Adjustment Automatic Insertion machines( leaded components)
Precautions
1. When inserting capacitors in a PC board by auto-insertion machines the impact load imposed on the capacitors should be minimized to
prevent the leads from chucking or clinching.
Technical
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
2. Our company recommends the method to place the lead with fewer loads that join the product.
considerations
4. Soldering
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_prec_e-E02R01
◆Selection of Flux
1. When soldering capacitors are on the board, flux should be applied thinly and evenly.
2. Flux used should be with less than or equal to 0.1 wt% (equivalent to Chlorine) of halogenated content. Flux having a strong acidity
content should not be applied.
3. When using water-soluble flux, special care should be taken to properly clean the boards.
◆Wave Soldering
1. Temperature, time, amount of solder, etc. are specified in accordance with the following recommended conditions.
2. Do not immerse the entire capacitor in the flux during the soldering operation. Only solder the lead wires on the bottom of the board.
◆Recommended conditions for using a soldering iron:
Precautions
1. Put the soldering iron on the land-pattern.
Soldering iron's temperature - below 350℃
Duration - 3 seconds or less
Numbers of times - 1 times
The soldering iron should not directly touch the capacitor.
◆Selection of Flux
1. Flux is used to increase solderability in wave soldering, but if too much is applied, a large amount of flux gas may
be emitted and may
detrimentally affect solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
2. With too much halogenated substance (Chlorine, etc.) content is used to activate the flux, an excessive amount of residue after soldering
may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the surface of the capacitors.
3. Since the residue of water-soluble flux is easily dissolved by water content in the air, the residue on the surface of capacitors in high
humidity conditions may cause a degradation of insulation resistance and therefore affect the reliability of the components. The
cleaning methods and the capability of the machines used should also be considered carefully when selecting water-soluble flux.
◆Wave Soldering
Technical
considerations
1. If capacitors are used beyond the range of the recommended conditions, heat stresses may cause cracks inside the capacitors, and
consequently degrade the reliability of the capacitors.
2. When the capacitors are dipped in solder, some soldered parts of the capacitor may melt due to solder heat and cause short-circuits or
cracking of the ceramic material. Deterioration of the resin coating may lower insulation resistance and cause a reduction of withstand
voltage.
◆Recommended conditions for using a soldering iron:
1. If products are used beyond the range of the recommended conditions, heat stress may deform the products, and consequently degrade
the reliability of the products.
5. Cleaning
Precautions
◆Board cleaning
1. When cleaning the mounted PC boards, make sure that cleaning conditions are consistent with prescribed usage conditions.
1. The resin material used for the outer coating of capacitors is occasionally a wax substance for moisture resistance which can easily be
dissolved by some solutions.
Technical
So before cleaning, special care should be taken to test the component’s vulnerability to the solutions used.
When using water-soluble flux please clean the PCB with purified water sufficiently and dry thoroughly at the end of the process.
Insufficient washing or drying could lower the reliability of the capacitors.
considerations
6. Post-cleaning-process
◆Application of resin molding, etc. to the PCB and components.
1. Please contact your local Taiyo Yuden sales office before performing resin coating or molding on mounted capacitors. Please contact
your local Taiyo Yuden sales office in case of sealing the capacitor with resin or molding it on mounted capacitors. Please verify that
the sealing or molding does not affect on the actual application in quality.
Precautions
1-1. The thermal expansion and coefficient of contraction of the molded resin are not necessarily matched with those of the capacitor. The
capacitors may be exposed to stresses due to thermal expansion and contraction during and after hardening. This may lower the
specified characteristics and insulation resistance or cause reduced withstanding voltage by cracking the ceramic or separating the
coated resin from the ceramics.
Technical
considerations
1-2. With some types of mold resins, the resin's decomposition gas or reaction gas may remain inside the resin during the hardening period or
while left under normal conditions, cause a deterioration of the capacitor's performance.
1-3. Some mold resins may have poor moisture proofing properties. Please verify the contents of the resins before they are applied.
1-4. Please contact Taiyo Yuden before using if the hardening process temperature of the mold resins is higher than the operating
temperature of the capacitors.
7. Handling
◆Mechanical considerations
Precautions
1. Be careful not to subject the capacitors to excessive mechanical shocks. Withstanding voltage failure may result.
2. If ceramic capacitors are dropped onto the floor or a hard surface they should not be used.
Technical
1. Because the capacitor is made of ceramic, mechanical shocks applied to the board may damage or crack the capacitors.
considerations
2. Ceramic capacitors which are dropped onto the floor or a hard surface may develop defects and have a higher risk of failure over time.
8. Storage conditions
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_prec_e-E02R01
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible. Recommended conditions: Ambient
temperature Below 40 ℃ Humidity Below 70% RH.
Precautions
Products should be used within 6 months after delivery. After the above period, the solderability should be checked before using the
capacitors.
2. Capacitors should not be kept in an environment filled with decomposition gases such as sulfurous hydrogen, sulfurous acid, chlorine,
ammonia, etc.
3. Capacitors should not be kept in a location where they may be exposed to moisture, condensation or direct sunlight.
Technical
1. Under high temperature/high humidity conditions, the decrease in solderability due to the oxidation of terminal electrodes and deterioration
of taping and packaging characteristics may be accelerated.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_leaded_prec_e-E02R01
相关型号:
©2020 ICPDF网 联系我们和版权申明